Types of water heat pumps

Types of water heat pumps

There are certain times or situations when the pressure that comes to us from water is not enough, the reasons are diverse, either because there is not enough water in the tank, because the pipes have been clogged or because we live on a floor and in the high areas does not come the pressure. Whatever the reason, it is always a good choice to know the type of pumps there and make use of them.

We can find a great variety of pumps, each of which has its own technical characteristics to supply the consumer. That is why it is key that we know how they work and how they can help us. We can distinguish two types of general characteristics to know which pump is good.

Pump types according to your power supply

There are many possibilities to power these types of installations, from the hand pump to draw water from the wells, to those systems that use electricity, fuel, water vapor even natural gas. However, the most used are the ones mentioned below:

Electric pumps: These pumps are connected to the current until they get enough power to run. In this model we find the peripherals and centrifuges

Peripheral pump: These pumps are used for domestic use, raising the water to more than 30 meters high, giving pressure to the water.

Centrifugal pump: These pumps have dual use, domestic and agricultural. They draw water in large quantities and in a short time. They are the most used worldwide, as they manage to draw water in a short time.

Motor pumps: Because they have a fuel engine, they can operate even without being connected to the current. They extract flow and pressure in equal parts, and the way of operation depends on the type of engine capacity. Its use is recommended for filling tanks and moving water in remote locations. It can also power a house when it runs out of light.

Types of water pumps according to their use

As we have seen all these equipment are used to extract water from somewhere deep and to be able to move it to another place with higher altitude or pressure. However, the needs of each individual must always be taken into account when choosing the right product.

Submersible water pump: They are electric pumps that work by immersing them in the liquid and extracting it to the surface. They are most commonly used when drilling and extracting water from deeper areas.

It all depends on the model and the manufacturer, but there are some that can raise the water up to 40 meters. Made of a special cover that prevents them from oxidizing and protects them from corrosion, and does not depend on the air pressure to draw water.

If you are looking for water extraction at key moments, with a simple system you can use. However, if you are going to use it more continuously, we recommend water pumps for Wells.

Water pump for tank: If the use you are going to give it is to extract the water and raise it to a tank that is located at the heights you need this type of pump. They are compact and capable of climbing up to 30 meters of water. Ideal for smaller spaces. Designed for clean water, although they incorporate filters to retain any material other than water.

Water pressure pump under tank if you want to improve the flow of water pressure you should opt for this type of pumps. It is placed at the outlet of the tank and offers pressurized water to get where we need it.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *